MISCOM8020G-4GF-16GT – 4 Gigabit SFP Ports + 16 Gigabit RJ45 Ports Layer 3 Rack Mounted Industrial Ethernet Switch
Switch Industrial – MISCOM8020G-4GF-16GT
Características e Especificações
4 Gigabit SFP ports + 16 Gigabit RJ45 port
IP40
Features
MISCOM8020G layer 3 full Gigabit Industrial Ethernet Switch is a high-performance Ethernet communication product specially developed for industrial communication. It supports 4 Gigabit Fx ports + 16 Gigabit Tx ports interface configurations. It is rack-mounted installation, supports front panel installation and rear panel installation. MISCOM8020G not only supports rich layer 2 software features such as ports, VLANs, multicast, QoS, and fast redundant rings, but also supports static and dynamic routing, multicast routing, and supports multiple management methods of Console, Web, and host computer network management software, to provide high performance and highly reliable solutions for industrial communications.
- Support 4 Gigabit Fx ports + 16 Gigabit Tx ports interface configuration
- Support RIP, OSPF, PIM layer 3 routing protocol
- Support multiple redundant networking mechanisms such as MW-Ring, MSTP, VRRP, EAPS, etc.
- Support multiple management methods and network centralized management
- Single rib type fanless shell design
- Front and rear indicator lights design
- Conforms to IEC61850-3 standard, and meets A-level standard of State Grid
Specifications of Hardware and Software |
|
| Software Function | |
| Switch Function | Support VLAN, GVRP Support port speed limit Support storm suppression Support port aggregation Support port flow control |
| Redundancy Protocols | Support VRRP/EAPS Support MW-Ring and the recovery time<20 ms Support RSTP/MSTP and compatible with STP |
| Multicast Routing | Support IGMP snooping/ IGMP v1/v2/v3 Support GMRP Support static multicast. |
| Routing technology | Support RIPv1 / v2, RIPng, OSPFv1 / v2 Support static routing protocol Support PIM-SM, PIM-DM |
| Service quality management | Supports SP and WRR queuing. Support QoS setting |
| Management and maintenance | Support Console, Telnet, WEB management mode, RMON Support SNMPv1 / v2c Support FTP, TFTP file transfer and software upgrade Support power failure alarm, power alarm, port alarm, ring alarm Support port mirroring, Syslog, LLDP, RTC, SNTPv4 IP supports DHCP server / relay / client |
| Technical Parameters | |
| Ethernet Standard | IEEE802.3-10BaseT IEEE802.3u-100BaseTX/100Base-FX IEEE802.3x-Flow Control IEEE802.3z-1000BaseLX IEEE802.3ab-1000BaseTX IEEE802.1ab IEEE802.1D-Spanning Tree Protocol IEEE802.1w-Rapid Spanning Tree Protocol IEEE802.1Q -VLAN Tagging IEEE802.1s Multiple Spanning Tree Protocol IEEE802.1p -Class of Service IEEE802.1X-Port Based Network Access ControlGVRP/RIPv1/v2&OSPFv1/v2/v3/VRRP/DHCP/CLI/EAPS/Qos/LACP/LLDP/IGMP/PIM/SNMP/SNTP/SSH |
| Switch Capability | |
| Priority Queues | 8 |
| VLAN ID | 4096 |
| IGMP Groups | 512 |
| MAC Table Size | 16k |
| Backplane bandwidth | 40Gbps |
| Switch Delay | <5µs |
| Interface | |
| Gigabit ports | Port numbers:20 |
| Connector: SFP for fiber port(LC, single or multi-mode), RJ45 for copper port | |
| Baud rate: 1000Base-LX(fiber port), 10/100/1000M for copper port | |
| Console port | RS232/ RJ45 |
| Terminal block for relay alarm | 5.08mm terminal block |
| Terminal block for power input | 5.08mm terminal block, 1A@24VDC |
| Communication Distance | |
| Twisted-pair | 100m(CAT5/CAT5e cable) |
| Multi-mode fiber | 100M multi-mode: 850nm, 550m |
| Single-mode fiber | 100M single-mode: 1310nm, 20km |
| LED Indicator Lights | |
| Front panel LED lights | Port light: LINK/ACT; SPEED; |
| Running light: RUN; | |
| Power LED: PWR1, PWR2 | |
| Alarm LED: ALARM; | |
| Rear panel LED lights | RJ45 LED: LINK/ACT; SPEED; |
| Fiber LED: LINK/ACT | |
| Power | |
| Input power | AC / DC220V (85-264VAC / 110-370VDC) |
| Power consumption | <15W |
| Overload protection | Support |
| Reverse protection | Support |
| Redundancy protection | Support |
| Working Environment | |
| Operating Temperature | -40°C~85°C |
| Storage Temperature | -40°C~85°C |
| Ambient Humidity | 5%~95% (non-condensing) |
| Physical Characteristics | |
| Shell | IP40 protection, aluminum alloy shell |
| Installation | 19″ 1U rack mounted for front and rear outlet installation |
| Dimension | 482.6mm×44mm×210mm (W×H×D) |
| Industry Standard | |
| EMC | EN61000-4-2(ESD), Level 4 EN61000-4-3(RS), Level 4 EN61000-4-4(EFT), Level 4 EN61000-4-5(Surge), Level 4 EN61000-4-6(CS), Level 4 EN61000-4-8, Level 5 |
| Impact | IEC60068–2-27 |
| Falling | IEC60068-2-32 |
| Shock | IEC60068-2-6 |
| Warranty | |
| Warranty | 5 Years |
| Certification | |
| Certification | CE, FCC, RoHS |
| Linha | Linha Maiwe |
|---|---|
| Grau de Proteção | IP40 |
| Conectores | Gigabit RJ45, Gigabit SFP |
| Gestão | Gerenciado |
| Instalação | Rack Mounting |
